Contact

de en pl fr hr nl hu it sv sl cn es

Cable seals Cable entries 90

Cable entries 90

Cable entries 90

With a nominal diameter of 90 mm, the HSI90 cable entry is available for delivery as a wall insert for installation in concrete walls flush with shuttering or as a sealing flange for retrofit installation with core drills. HSI90 wall inserts offer maximum flexibility for downstream use. They are delivered fitted with a pressure-tight closing cover as standard. Various system covers are available to seal cables and for pressure-tight empty conduit connection.

Hauff-Technik also offers the KES-M90 pressure-tight cable entry system, which is compatible with the HSI90 system. Featuring a Hateflex spiral hose and supporting various options for cable sealing, this system can relied upon to provide optimum protection for the cables that are being laid.

Wall inserts and aluminium flange

Double wall insert

for setting in concrete

For the gastight and watertight connection on both sides of system covers for cables and cable ducts and …

Slanted double wall insert

for setting in concrete

HSI90 1xz K2 S_°/X

For slanted cable entries from any direction and an optimum bending radius when feeding in and sealing cables …

Slanted single wall insert

for setting in concrete

HSI90 1xz K S_°/X

For slanted cable entries from any direction and an optimum bending radius when feeding in and sealing cables …

Single wall insert

for setting in concrete

For the gastight and watertight connection on one side of system covers for cables or cable ducts, for a high …

Site power supply entry

for secondary substations

For temporary power supply and/or emergency supply to secondary substations. With the site power supply …

Aluminium flange

for retrofit dowelling

For retrofit dowelling with core drills or for screwing onto housings. Used for the gastight and watertight …

System covers for cables

Closing cover

for empty wall inserts and aluminium flange

For pressure-tight sealing of wall inserts that are not in use and aluminium flange of the HSI 90 system.

System cover

cable seal with cold shrink-fit method

For use in wall insert and aluminium flange HSI 90. The cold shrink sleeves support a wide area of …

System cover

cable seal with hot shrink-fit method

For use in wall insert and aluminium flange HSI 90. The thermal sleeves support a wide area of application. …

Press seal

for retrofit sealing

HRD 94/83 GF-z/d b60 A2/EPDM55

Press seal with flange for use in wall insert and plastic flange HSI 90. For the retrofit sealing of cables, …

System covers for connecting cable ducts

System cover

with sleeve method for smooth cable ducts

For use in wall insert and aluminium flange HSI 90. For connecting smooth cable ducts. The seal is created …

Cable entry system

Pipe connection sleeve

for connecting smooth cable ducts

KES90 MA70-90/90-110

Used to connect Hateflex spiral hose 14090 to smooth cable ducts ∅<sub>a</sub> 75 mm or 90 mm.

Spiral hose

Hateflex14090/x

Flexible and very stable cable duct hose. A pressure-tight cable entry system can be created with the …

Sealing set interchangeable insert

for cable seal at the end of the spiral hose

KES90 MA90-102/90-102 WE100 SG 1x18-65

Sealing set with sleeve KES-M 90-WE including split interchangeable insert with segment ring technology for …

Connection set for core drill/wall sleeves

KES90 MA KB SET

For connecting the Hateflex spiral hose 14090 to core drills or wall sleeves. The pipe socket is connected to …

Cement-coated wall sleeve with sleeve

floor entry for Hateflex spiral hose

KES90 MA ZVR100/500

For use in waterproof concrete. The Hateflex 14090 spiral hose can be connected using a sleeve. The seal with …

System cover

for connection to the wall insert HSI 90

For connecting the Hateflex spiral hose 14090 to the wall insert or aluminium flange HSI 90.